Temperature memory effect and its stability revealed via differential scanning calorimetry in ethylene‐vinyl acetate within glass transition range

In this article, we reveal the temperature memory effect (TME) in a commercial thermoplastic polymer, namely ethylene‐vinyl acetate (EVA), within its glass transition range via a series of differential scanning calorimeter (DSC) tests. In addition, we investigate the influence of heating holding time and also compare the observed TME in current study with that of shape memory alloys (SMAs). It is concluded that the TME via DSC (without any macroscopic shape change) is achievable within the glass transition range of a polymer. Conversely, although the observed TME shares the many similar features as those in SMAs, due to the nature of micro‐Brownian motion in the glass transition of polymers, the resulted TME is strongly affected by the heating holding time. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1731–1737     

Specific Design of Titanium(IV) Phenolato Chelates Yields Stable and Accessible,Effective and Selective Anticancer Agents

Octahedral titanium(IV) complexes of phenolato hexadentate ligands were developed and showed very high stability for days in water solutions. In vitro cytotoxicity studies showed that, whereas tetrakis(phenolato) systems are generally of low activity presumably due to inaccessibility, smaller bis(phenolato)bis(alkoxo) complexes feature high anticancer activity and accessibility even without formulations, also toward a cisplatin‐resistant cell line. An all‐aliphatic control complex was unstable and inactive. A leading phenolato complex also revealed: 1) high durability in fully aqueous solutions; accordingly, negligible loss of activity after preincubation for three days in medium or in serum; 2) maximal cellular accumulation and induction of apoptosis following 24–48 h of administration; 3) reduced impact on noncancerous fibroblast cells; 4) in vivo efficacy toward lymphoma cells in murine model; 5) high activity in NCI‐60 panel, with average GI₅₀ of 4.6±2 μm . This newly developed family of Ti^IV complexes is thus of great potential for anticancer therapy.     

Structure,crystallization and dielectric resonances in 2–13 GHz of waste-derived glass-ceramic

Structure, kinetics of crystallization, and dielectric resonances of waste-derived glass-ceramic prepared via quench-heating route were studied as a function of dosage of iron ore tailing (IOT) within 20–40 wt% using X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and vector network analyzer (VNA) measurements. The glass-ceramic mainly consisted of ferrite crystals embedded in borosilicate glass matrix. Crystallization kinetics and morphologies of ferrite crystals as well as coordination transformation of boron between [BO₄] and [BO₃] in glass network were adjustable by changing the amount of IOT. Dielectric resonances in 6–13 GHz were found to be dominated by oscillations of Ca²⁺ cations in glass network with [SiO₄] units on their neighboring sites. Ni²⁺ ions made a small contribution to those resonances. Diopside formed when IOT exceeded 35 wt%, which led to weakening of the resonances.     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

A new nonlinear optical silicate carbonate K2Ca[Si2O5](CO3) with a hybrid structure of kalsilite and soda-like layered fragments

Single crystals of a new silicate carbonate, K₂Ca[Si₂O₅](CO₃), have been synthesized in a multi-components hydrothermal solution with a pH value close to neutral and a high concentration of a carbonate mineralizer. The new compound has an axial structure (s.g. P6₃22) with unit cell parameters a = 5.04789 (15), c = 17.8668 (6) Å. Pseudosymmetry of the structure corresponds to s.g. P6₃/mmc which is broken only by one oxygen position. The structure consists of two layered fragments: one of the type of the mineral kalsilite (KAlSiO₄) and the other of the high-temperature soda-like α-Na₂CO₃, Ca substituting for Na. The electro-neutral layer K₂[Si₂O₅] (denoted K) as well as the layer Ca(CO₃) (denoted S) may separately correspond to individual structures. In K₂Ca[Si₂O₅](CO₃) the S-K layers are connected together via Ca-O interactions between Ca atoms from the carbonate layer and apical O atoms from the silicate one, and also via K-O interlayer interactions. A hypothetical acentric structure, sp.gr. P-62c, is predicted on the basis of the order-disorder theory. It presents another symmetrical option for the arrangement of K-layers relative to S-layers. The K,Ca-silicate-carbonate powder produces a moderate SHG signal that is two times larger that of the α-quartz powder standard and close to other silicates with acentric structures and low electronic polarizability.     

Site‐Resolved Two‐Step Relaxation Process in an Asymmetric Dy2 Single‐Molecule Magnet

Elaborate chemical design is of utmost importance in order to slow down the relaxation dynamics in single‐molecule magnets (SMMs) and hence improve their potential applications. Much interest was devoted to the study of distinct relaxation processes related to the different crystal fields of crystallographically independent lanthanide ions. However, the assignment of the relaxation processes to specific metal sites remains a challenging task. To address this challenge, a new asymmetric Dy₂ SMM displaying a well‐separated two‐step relaxation process with the anisotropic centers in fine‐tuned local environments was elaborately designed. For the first time a one‐to‐one relationship between the metal sites and the relaxation processes was evidenced. This work sheds light on complex multiple relaxation and may direct the rational design of lanthanide SMMs with enhanced magnetic properties.     

一种带疏水长链的水溶性偶氮引发剂的合成及端基疏水聚合物疏水缔合效应研究

以偶氮二异丁腈、十二胺为主要原料,通过Pinner反应制备了一种两端各带有12个碳烷基链的水溶性偶氮引发剂——2,2'-偶氮二异丁基十二脒盐酸盐AIBL.采用核磁氢谱、元素分析及液相色谱对AIBL进行了结构及纯度表征,采用TGA、DSC和紫外分光光度计研究了其热分解现象和热分解动力学,采用表面张力仪对其表面活性进行了测定.结果表明,所合成的引发剂AIBL具有预想的结构和较高的纯度,其热分解反应属于一级反应,热分解活化能为134.80 k J/mol,70℃下水中的半衰期约为4 h;AIBL在水溶液中具有表面活性,其临界胶束浓度为0.13 g/L,对应的表面张力为33.57 m N/m.以丙烯酰胺为单体、AIBL为引发剂制备了水溶性端基疏水聚合物SPAM.采用溴化法研究其转化率,应用乌氏黏度法、零切黏度法以及荧光探针对其缔合作用进行了研究.结果表明,AIBL具有良好的引发丙烯酰胺聚合的能力;相对于不带疏水长链的引发剂所合成的聚合物PAM,SPAM具有明显的疏水缔合效应,这说明AIBL成功地将疏水长链引入到聚合物的端基中,从而形成端基疏水聚合物.     

Nanorattles or Yolk–Shell Nanoparticles—What Are They,How Are They Made,and What Are They Good For?

The development of nanotechnology has led to the design of cutting‐edge nanomaterials with increasing levels of complexity. Although “traditional” solid, uniform nanoparticles are still the most frequently reported structures, new generations of nanoparticles have been constantly emerging over the last several decades. The outcome of this nano‐art extends beyond nanomaterials with alternative compositions and/or morphologies. The current state‐of‐the‐art allows for the design of nanostructures composed of different building blocks that exhibit diverse properties. Furthermore, those properties can be a reflection of either individual features, which are characteristic of a particular building block alone, and/or synergistic effects resulting from interactions between building blocks. Therefore, the unique structures as well as the outstanding properties of nanorattles have attracted increasing attention for possible biomedical and industrial applications. Although these nanoparticles resemble core–shell particles, they have a distinctive feature, which is a presence of a void that provides a homogenous environment for the encapsulated core. In this Review, we give a comprehensive insight into the fabrication of nanorattles. A special emphasis is put on the choice of building blocks as well as the choice of preparation method, because those two aspects further influence properties and thus possible future applications, which will also be discussed.